uGlow [1.10]

- Cleaned up code so that I [and others] can read it easier. It was a mess before. - Very small changes in code, shouldn't be noticeable at all. Bigger changes are on their way, but I need to make things all nice and organized before I make another mess! <3

- Added Custom Glow Pattern in the Configuration! Define a list of colors and tick rate, then have fun! This is treated as a color within the plugin, and as such, the permission to use is uglow.color.custom. - Added commandAlias in the config.yml. - Added keepGlowOnLogin boolean to the config. Recommended you set this to "false". - Added %plugin and %version placeholders to the config. - Minor code cleanup. Sorry for the delay on this update, the custom glow pattern took longer than I had intended to make it function properly! ^-^

- Fixed version numbers across the plugin and config.yml - Removed more debug coding

- GlowAPI no longer required! - PacketListenerAPI no longer required! - These apis will now be internally compiled against uGlow, and you will no longer be required to have these APIs in order to use the the plugin! - Removed Rainbow-Ticks debug message I will be updating the main post in the next couple of hours. In the meantime, enjoy, and a big shoutout to @inventivetalent for all of his/her hard work on GlowAPI, PacketListenerAPI, and APIManager! For those wishing to build alongside uGlow, you can head to the uGlow git repo HERE. Updates push much more frequently there than here.

- ATTN: Please use GlowAPI version 1.2.0! 1.2.1 seems to be having some issues atm! - Removed the unlisted entity command as it appeared to be causing quite a few bugs D:

-Dependencies are now marked as "soft", meaning uGlow will still load without them. Messages will be thrown in the console as a warning that one of the APIs hasn't properly enabled. -Minor bugfixes and more cleanup... so much dust!

- Added /uGlow entity. Point at an entity, run the command, and turn the world into your disco ball! Permission Node: - uglow.entity​ Not adding these to the official post as they are still likely to be buggy, and multitudes of use cases haven't been tested with it. Planned features: brush mode, multiple colors other than rainbow, non-bugginess, persistance through restarts. ​

- Added permission for players to view glows. - uglow.view​ - Array of players updates whenever someone changes their or someone else's glow on/off/color. - Shortened PlayerJoinEvent to fit with the new methods.

- Full rewrite of majority of code, better handling and less redundancy. - Rainbow fixed and improved - Multiple players can be rainbow and toggle it on/off etc - Rainbow is, for all intents and purposes, considered a "color" - Switching between solid colors and rainbow is more reliable, without having to toggle glow on and off. - Rainbow will save through server restarts and relogs, like colors​ - Re-added /uGlow [player] [args] commands - Reworked permissions slightly - uglow.reload - uglow.on - uglow.off - uglow.color.[color] - uglow.others.on - uglow.others.off - uglow.others.color​ - Fixed timing when switching between colors, shouldn't bug out anymore. - Improved language handling, no difference to end user. - Invalid permissions now all fall under the same Lang enum. - Data Storage will likely be improved in the near future, but I have made adjustments in this version to improve the current setup.

-Fixed PlayerJoinEvent when players had RAINBOW set as their glow color. - Temporarily removed /uGlow [player] etc, will be back soon!

- Added Rainbows. This implementation might be a bit buggy, all bug reports would be very welcome! - /uGlow rainbow - /uGlow <player> rainbow​ This will be refined over the next few mini-updates. ^-^

- Most/All messages to players in game are now configurable, see the lang.yml for a full readme and available placeholders. - Minor changes to command handling. .SpoilerTarget">Spoiler: lang.yml Code (Text): # ------ README ------ # This file can be used to configure almost every message sent to players in game. When you have # finished modifying the lang.yml, please use /uGlow reload for your changes to apply. # ------ FORMATTING CODES ------ # You can color your messages by using minecraft formatting codes # Full list of available formatting codes here: http://wiki.ess3.net/mc/ # ------ PLACEHOLDERS ------ # Some messages can have placeholders in them. The available placeholders are as follows: # %p : Sender or target player, depending on context # %color: Color inputted. # %colorlist: Used in invalidGlowColor. Inputs list of valid colors to choose from. # ------ MESSAGES ------ # pluginPrefix: Inserted Before Every Message. # playerGlowOn: When a player toggles their glow on. # playerGlowOff: When a player toggles their glow off. # playerGlowPerm: Player has no permission to toggle their glow. # playerGlowOnJoin: Message Sent to player on join if their glow status is "true". # playerGlowAlready: Player is already glowing when trying to toggle their glow on. # playerGlowNotGlowing: Player isn't glowing when trying to toggle their glow off. # playerGlowColor: Sent to player when they change their glow color. # playerGlowColorPerm: Player has no permission to change their glow color to %color. # invalidGlowColor: Player has entered an invalid glow color # listGlowColor: List of glowcolors used in invalidGlowColor. Use with %colorlist. # otherGlowOn: Player has toggled another's glow on. # otherGlowOff: Player has toggled another's glow off. # otherGlowPerm: Player does not have permission to toggle another's glow perm. # otherGlowAlready: Other player is already glowing. # otherGlowNotGlowing: Other player isn't glowing. # otherGlowColor: Sent when player toggles another's glow color # otherGlowColorPerm: Player doesn't have permission to toggle another's glow color. pluginPrefix: "&7[&auGlow&7]&b " playerGlowOn: "&aYour glow has been toggled ON" playerGlowOff: "&cYour glow has been toggled OFF" playerGlowPerm: "&cYou do not have permission to toggle your glow!" playerGlowOnJoin: "&aYour glowing status has been restored!" playerGlowAlready: "&cYou are already glowing!" playerGlowNotGlowing: "&cYou aren't glowing!" playerGlowColor: "&cYou have set your glow color to %color!" playerGlowColorPerm: "&cYou do not have permission to change your glow color to %color!" invalidGlowColor: "Invalid Color! Please use one of the following - %colorlist" listGlowColor: "Aqua, Black, Blue, Dark_Aqua, Dark_Blue, Dark_Gray, Dark_Green, Dark_Purple, Dark_Red, Gold, Gray, Green, Red, White, Yellow" otherGlowOn: "&aYou have toggled %p's glow ON!" otherGlowOff: "&cYou have toggled %p's glow OFF" otherGlowPerm: "&cYou do not have permission to toggle %p's glow!" otherGlowAlready: "&c%p is already glowing!" otherGlowNotGlowing: "&c%p isn't glowing!" otherGlowColor: "&cYou have set %p's glow color to %color!" otherGlowColorPerm: "&cYou do not have permission to change %p's glow color to %color!" otherGlowOffline: "&c%p is either offline or does not exist!"

-Added ability to set another user's glow color - /uGlow [player] [color] - uglow.color.others​ -Added ability to set another user's glow status - /uGlow [player] <on|off> - uGlow.glow.others​ -Fixed color error string

- added /uGlow <reload> - bits of code cleanup

- Added /uGlow <on|off> - Fixed grammar in some messages. - Player Glow toggle & color now properly saves per player

-Added per-color permissions for glowing. - uglow.color.[color]​ - GlowAPI version required: 1.2.0 - Added PacketListenerAPI dependency, per GlowAPI. - Removed unneeded code fixed by GlowAPI Thanks to @inventivetalent for the API updates! <3

Added permissions: - uglow.glow -- Toggle your glow status! - uglow.color -- Change your color! more indepth perms for color coming soon!

- Fixed Command Handling due to plugin name change shortly before release. Thanks to @harrison015 for pointing the error out!

- Removed messages used for debugging, like "You are now sneaking" etc